Sega Dreamcast + Toro Box VGA 480p Output Optimal OSSC Timing: Note: "Resident Evil - Code Veronica" used for VGA calibration. -------------------- Input Cable: VGA Cable (hooked into the Toro Box) OSSC Firmware = 0.81a (use 0.81 if you don't have audio version of OSSC) OSSC input set to AV3 -------------------- Note: Although these settings are based on my Dreamcast + Toro Box, the only values that may or may not differ from other Dreamcast hardware are the following: 1. Sampling phase (this always will be restricted to a case-by-case basis). 2. Advanced timing for 480p's H. backporch. 3. Advanced timing for 480p's V. backporch. Everything else should be universal. -------------------- Toro Box settings: Sync push-button in the 'out' position for H and V sync. VGA/RGB switch set to VGA. Scanline switch set to 'off'. -------------------- Video in proc > Video LPF = Auto Note: As of the current firmware of 0.81, the RGB gain now appears to be perfectly calibrated at default settings for Toro Box VGA output. -------------------- Sync opt. > Analog sync LPF = Off -------------------- Output opt. > 480p/576p proc = Line2x -------------------- Sampling opt. > Sampling phase = 45 deg 480p in sampler = DTV 480p Allow upsample2x = Off 480p: H. samplerate = 858 H. Synclen = 62 H. backporch = 111 H. active = 640 V. synclen = 6 V. backporch = 34 V. active = 480 --------------------