Neo Geo AES & MVS Optimal OSSC Timing:


--------------------


Input Cable: RGBS SCART Cable

OSSC Firmware = 0.81a (use 0.81 if you don't have audio version of OSSC)


--------------------


Note: Although these settings are based on my bypass-modded AES3-3, the only values that may or may not differ from other AES or MVS hardware are the following:

1. Sampling phase (this always will be restricted to a case-by-case basis).

2. Advanced timing for 320x240's H. backporch.

3. Advanced timing for 320x240's V. backporch.

Everything else should be universal.


--------------------


Video in proc  >

Video LPF = 9MHz (SDTV)


--------------------


Sync opt.  >

Analog sync LPF = 2.5MHz (max)


--------------------


Output opt.  >

240p/288p proc = Whatever linex mode you prefer.

LineXx mode = 320x240 optim.


--------------------


Sampling opt.  >

<Adv. timing  > 320x240:

H. samplerate = 384
H. synclen = 31
H. backporch = 26
H. active = 320

V. synclen = 3
V. backporch = 13
V. active = 240

Back out to "Sampling phase" and adjust until all pixels are sharp with the least amount of color bleed. Mine was perfect at 45 degrees.


--------------------


Post-proc.  >

Vertical mask = 8 pixels (not needed if you're running line5X in 1920x1080 output mode on the OSSC)


--------------------